 |
| 1. |
Drill |
| Drill
to clear out the damaged thread with drill size as
specified on kit (if necessary) |
|
|
|
| |
|
 |
| 3. |
Tap |
| Tap
Thread carefully using correct procedures. (if unsure,
consult your dealer) |
|
|
|
| |
|
 |
| 5. |
Install |
| Wind
insert in with light downward pressure until 1/4 to 1/2
turn below the surface. |
|
|
|
|
|
|
 |
| 2. |
Check |
| Ensure
tap thread matches bolt. |
|
|
|
| |
|
 |
| 4. |
Set
Tool |
| Place
insert on installation tool, positioning the adjustable
stop so that the insert tang is centered in the tang
slot. |
|
| |
|
 |
| 6. |
Tang
Removal |
| Do
not attempt to twist tang off with tool. Lift tool from
tang, turn tool 90 degrees and tap down sharply. Use
tang break-off tool where supplied. For sparkplug and
large fine thread inserts, use long nose pliers to pull
tang out. |
|
|
|
|
